Free & Fast USA Shipping Learn More
SKX007/SRPD Watch Case V3 – Crown At 3 – CT713 Polished/Brushed
$70.00
Only 2 left in stock
- Material – HQ Stainless Steel 316L surgical grade
- Description – CT713 (aka 705 with RX inspired crown guard profile) Crystaltimes in-house designed crown at 3 case. Drilled through lugs** – Tested to 300M with standard oem 2.8mm crystal Compatible with all SKX007 OEM parts and the majority of aftermarket parts***
Here’s what you get!
- 1 x Case
- 2 x 22mm Fat Spring Bars
- 1 x Crystal Gasket – fitted
- 1 x Case Back Gasket
- CASE BACKS IMPORTANT NOTE – CT231 or CT239B with built in spacer are for use with NH35/36 movements with thinner grey movement holder – no need to do anything the movement can drop straight in. If you are using a movement with the thicker black spacer you MUST use an oem case back or our CT200 or CT239A
- Dimensions – The same dimensions as the SKX007 0020 case – 22mm lug width, lug to lug dimension, thickness, width, height all as SKX007.Moving the crown guard to 3 adds nothing to the width.
- Water Resistance – As oem*
- *This case was tested to 300M during development and subsequent testing of actual production cases – no failures were recorded.
- Suitability
- A great basis for a custom build – a mass of SKX007 aftermarket mod parts are available for you to build your DREAM MOD
- INFO – Crown stem length same as SXK007 OEM with 0020 case
- **Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case
- *** We can pretty much guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have many different SKX007 bezels in the hope that you may consider purchasing your bezel from us.
- Additional info – Ideal for building a complete custom 1 off mod
Finish
- Hi Polish/Brushed as oem 0020 case
16 reviews for SKX007/SRPD Watch Case V3 – Crown At 3 – CT713 Polished/Brushed
You must be logged in to post a review.
Anonymous (verified owner) –
mogwan (verified owner) –
Finished with lightly patinated Snowflake hands (as close to the face as I could find.)
Now it will get a good cleaning- especially around the bezel and crystal edge as there’s a bit of grease from the bezel spring still migrating. Then a proper leather Tudor watchband- one of the new ones whose ends wrap around the round case ends with no gap.
mogwan (verified owner) –
I used a CT713 case to make my own ‘Left-handed’ ‘Vintage’ Tudor Submariner driven by a Seiko NH36 movement. The Tudor dial has no window, so I removed the day & date wheels to cut down on moving parts for the mechanism. The Tudor dial has the studs in the wrong locations for Seiko so I cut & ground them off and used 3M black double stick squares after watch cement failed to hold the face securely. The Tudor face is 29mm so I had to remove .5mm from the diameter so it would pass over the 713’s little internal lip and sit firmly on the CT brushed aluminum chapter ring. I added a CrystalTimes Stainless sterile crown and fitted an NH35 stem. The Bezel is a CT270 Brushed with a curved ceramic bezel I pulled from the parts drawer- missing the pip-not a CT part but used to add to the vintage effect. The Crystal is a CT037 Hi-Hat- Clear/no AR and finished with lightly patinated Snowflake hands (as close to the face as I could find.)
Now it will get a good cleaning- especially around the bezel and crystal edge as there’s a bit of grease from the bezel spring still migrating. Then a proper leather Tudor watchband- one of the new ones whose ends wrap around the round case ends with no gap.
Daniel K. (verified owner) –
The case worked well with all the part from the skx007, except the case back when screwed in tightly. It stops the movement. It could be the 2 side tape used mounting the dial. I might need to get the display caseback from CT as well as a bezel and insert so that everything fits precisely. I will remove and replace the 2 sided tape and try again before doing all the first just to be sure.
Anonymous (verified owner) –