Home » Cases

Shop cases for your mod here! Crystaltimes is generally known for their Sapphire Crystals, but has ventured into this category to over deliver on an aftermarket watch mod piece that is under served. We noticed that there aren’t reliable sources for high quality aftermarket cases, so we decided to offer it to our customers. Each case you see here has been through extensive research, development, and testing to ensure OEM standards are met. Cases play a foundational role in achieving the ultimate mod, and here at Crystaltimes we are striving to enable customers to build their mod from the ground up. Browse the case items below to find a suitable match for your mod. Can’t find your specs? Write us an email and we will add it to our case production line!

Showing all 4 results

  • CT700

    Material – HQ Stainless Steel 316L surgical grade

    Description – The Famous and the very first of its kind Crystaltimes Replacement Case Body – Suitable for replacement of the SKX007 0020 200M Divers case -With and without Drilled Through Lugs* – Black case option also available

    *Great for easy strap and bracelet change – reducing the risk of marking/damaging your case

    Suitability

    Replacement for SKX007 0020 CASE

    Included FREE with every caseCrystal GasketCase Back Gasket2 x 22mm Fat Spring Bars

    2 Finishes

    1) High Polish/Brushed

    2) Black IP (Ionic Plating)

    Information – Case Body with and without Drilled Lugs. Polished/Brushed and Black available with and without drilled through lugs. Suitable as the perfect replacement for a damaged SKX007 0020 case. All oem parts will fit this case. This is our tribute to the classic oem case. It is NOT and was never intended to be a 100% exact copy of the oem case e.g. to allow the fully drilled lugs to look sweet the outer profile of the lugs is made a little meatier. We believe we achieved a very nice balance between the oem look and our case. All oem parts are compatible and will fit this replacement case incl the oem Jubilee Bracelet. Takes fat 2.5mm spring bars.

    NOTE – Aftermarket bracelets with SEL may in some rare instances require a slight adjustment on the SEL as they do even with the oem case in some instances

    Water Resistance – As oem*

    *This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.

    Additional info below in product description

    Videos:

    Superb look at the CT700 case and full build by Lume Shot!

    CT700 Case YouTube reveal Performed By Random Rob!

    CT700 Black Case Reveal by TheTimeKeeper!

    Instagram Video By @Zwei_1383

    $79.95$89.95 Select options
  • CT701

    CT701 is sold out, and no longer available. There may be a few remaining on our international website. Click Here to go there now!

    Material – Case + Back HQ Stainless Steel 316L surgical grade

    LIMITED PRODUCTION – 300 pcs individually laser numbered – we 100% guarantee this case will not be made again

    Description – Crystaltimes in-house designed chunky “tool look” DIVERS crown at 3 case complete with case back. Drilled through lugs* and He** valve at 9. Tested to 350M with standard oem 2.8mm crystal will certainly be good for much more with a thicker 5mm crystal and our 3G Crown fitted – currently we are testing up to 500M with a high degree of confidence. Compatible with SKX007 parts***

    Dimensions – The same dimensions as the SKX007 0020 case – 22mm lug width, lug to lug dimension, thickness, width, height all as SKX007. It looks a little larger than the SKX007 as we went for the flat sided design and moving the crown to the 3 position but in actuality the dimensions are pretty much the same as the classic SKX007 0020 case

    INFO – Crown stem length same as SKX007 OEM and out CT700 case so if you have purchased a crown from us CT208 CT209 CT218 CT228 with cut and fitted stem it will fit straight in to the CT701

    * Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case

    ** Fully Functional Helium Gas Release Valve at 9

    *** We can guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have 4 different SKX007 bezels in the hope that you may consider purchasing your bezel from us

    Designed especially for the NH35/36 NE15 crown at 3 movements enabling them to be dropped straight in, no need to change the grey movement holder. A special case back is supplied with built in spacer – needed when using the NH35/36 with standard grey movement holder. Should you choose to use the thicker black movement holder the oem case back or our CT200 case back would need to be used

    Included FREE with every caseCrystal GasketCase Back Gasket2 x 22mm Fat Spring Bars

    Finish – High Polish flat sides and underside – Brushed Top

    Information – Case Body + Back – Drilled Lugs. All oem parts are compatible and will fit this replacement case incl the oem Jubilee Bracelet. Takes fat 2.5mm spring bars.

    NOTE – Aftermarket bracelets with SEL may in some rare instances require a slight adjustment on the SEL as they do even with the oem case in some instances

    Water Resistance – As oem*

    *This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.

    Suitability

    A great basis for a custom build or as a replacement for SKX007 0020 case

    Additional info – Ideal for replacing a badly damaged case or building a complete custom 1 off mod without having to buy a complete watch and ending up only using the case!

    Case Number Assignment:

    We will assign case numbers based on the lowest available at time of purchase. Case numbers are assigned on a first come first serve basis.

    Videos:

    Instagram Video

    Select options
  • CT702

    Material – HQ Stainless Steel 316L surgical grade

    Description – Convert your SKX007 0020 cased 200M Divers Watch to an SRP Turtle with this superb unique case designed by Crystaltimes. Full size SRP Turtle look case 22mm lug width – oem and aftermarket bracelets fit. Fully tested to 200M PLUS. All SKX007 parts fit* – Drilled Through Lugs as original oem SRP Turtle** – Black case** option also available

    *Crystal, Chapter Ring, Bezel, Bezel Insert, Crown, Bracelet, movement, case back, all gaskets – EVERYTHING!

    **Great for easy strap and bracelet change – reducing the risk of marking/damaging your case

    Included FREE with every caseCrystal GasketCase Back Gasket2 x 22mm Fat Spring Bars

    2 Finishes

    1) High Polish/Brushed Case – similar to oem

    2) Black IP (Ionic Plating)

    Information – It is NOT and was never intended to be a 100% exact copy of the oem SRP Turtle case. To allow all the SKX007 parts to fit small adjustments are made in a number of areas but this does not affect the look of the full-size case to any degree at all indeed its pretty hard to see the difference

    Water Resistance – As oem*

    *This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.

    Prices

    Polished/Brushed – 99.95 usd

    Black IP (Ionic Plating) – 109.95 usd

    Additional info in product description below

    $99.95$109.95 Select options
  • CT703

    Material – HQ Stainless Steel 316L surgical grade

    Suitability

    Replacement for SKX007 0020 CASE

    Limited Edition – 500 pcs laser numbered 001/500 to 500/500

    Note – Black Cases the number is not visible due to the coating

    Description – The Famous and the very first of its kind Crystaltimes Replacement Case Body – Now upgraded with Helium Valve at 9. Suitable for replacement of the SKX007 0020 200M Divers case -With Drilled Through Lugs* – Black case option also available

    *Great for easy strap and bracelet change – reducing the risk of marking/damaging your case

    Included FREE with every caseCrystal GasketCase Back Gasket2 x 22mm Fat Spring Bars

    2 Finishes

    1) High Polish/Brushed Case – similar to oem

    2) Black IP (Ionic Plating)

    Information – Case Body with Drilled Lugs. Suitable as the perfect replacement for a damaged SKX007 0020 case. All oem parts will fit this case. This is our tribute to the classic oem case. It is NOT and was never intended to be a 100% exact copy of the oem case e.g. to allow the fully drilled lugs to look sweet the outer profile of the lugs is made a little meatier. We believe we achieved a very nice balance between the oem look and our case. All oem parts are compatible and will fit this replacement case incl the oem Jubilee Bracelet. Takes fat 2.5mm spring bars.

    NOTE – Aftermarket bracelets with SEL may in some very rare instances require a slight adjustment on the SEL as they do even with the oem case in some instances

    Water Resistance – As oem*

    *This case was tested to 350M during development and subsequent testing of actual production cases – no failures were recorded.

    Additional info – Ideal for replacing a badly damaged case or building a complete mod without having to buy a complete watch and ending up only using the case! Black option available in limited numbers.

    $99.95$109.95 Select options