3 Common Errors of Watch Hand Mod Installs: What to Know

Thanks to the advent of Seiko modding that has taken the American watch community by storm, wearers and enthusiasts aplenty are starting to partake in the fanfare and customize their pieces—yourself included.

Although you’re well-aware of the fact that your timepieces are already beautiful as is, there’s something about making them unique with a few special touches that are too hard to ignore. Whether you’re looking to give your SKX007, Mako, Sumo, Tuna, or any other Seiko watch a new, refreshed look, modding will always be a good idea.

With a wide range of options to choose from in Crystaltimes USA’s online store, you might be wondering about what you should start with. After comparing things side by side, you’ve likely realized that beginning your modding journey with a watch hand replacement is the way to go.

Before you go for the mod mentioned above and start making magic happen for your beloved timepieces, we must first talk about the mistakes that you can make when replacing your watch hands.

Common Mistakes to Avoid (And How to Fix Them, If They Happen)

As small as they may be, watch hands always make for the perfect first mod because of how much of a difference they make in terms of how your timepiece looks, feels, and works. To help ensure that you have the smoothest and most error-free experience possible when swapping your Seiko’s watch hands, let’s look at some of the common issues to watch out for: 

Hand Misalignment

Given the minuscule size of a standard watch hand, you might think that even a tiny misalignment won’t bother you that much. But you’ll quickly learn that it’s something that you won’t help but notice often.

Generally, the root causes for a watch hand misalignment fall along the lines of bad installations or faulty movements that cause the said parts to settle down in the wrong place or position. If you experience this problem when placing your mod parts in, then it’s best that you pull the hands out and then install them again for a quick reset. 

If you’re still dealing with a hand misalignment issue, then it’s recommended that you get your watch movement checked by a professional to ensure that it settles down properly!

Stuck Movements

Another common issue that happens whenever watch hand mods are performed is when a movement doesn’t work as it should. 

When a set of new hands don’t run or jump after installation, the chances are that there’s an installation error or damage to the movement itself. Yet, there are various causes for this kind of problem that are best left to the professionals, such as:

• Dust being stuck in the actual movement
• A lack of lubrication in moving parts
• Broken cogs or other components in the movement

Seconds Hand Hesitation

After installing your new set of modded hands, you may notice that your second hand follows a new and unsettling pattern: it moves for two seconds, hesitates for one second, and then does it all over again.

If your second hand is doing this, the chances are that you’re dealing with an End of Life (EOL) warning that is commonly associated with automatic watches. The quickest fix for this is to replace the battery of your watch so that the movement goes back to normal. But if a new power source doesn’t fix the problem, then you might be dealing with a movement issue!

Conclusion

Although diving into the world of Seiko modding can be exciting when you start with a watch hand replacement, things can easily become complicated if issues begin to show up. Fortunately, being mindful of the issues that can pop up will allow you to act fast in case they pop up so that you can fix them right away before other problems arise! 

We’re the leading supplier of Seiko mod parts in the USA that offers various types to make any model unique, whether it’s a Tuna, Turtle, Mako, or Sumo. Bring out your creativity and escape ubiquity in the world of Haute Horlogerie by visiting our website and ordering mod parts for your watch today!