SKX007/SRPD Panerai Conversion Watch Case – CT716 Polished

• Material – HQ Stainless Steel 316L surgical grade
• Description – SKX007 to Panerai inspired look CONVERSION CASE. Drilled through 22mm lugs** – Tested to 300M. Compatible with all SKX007 OEM parts and the majority of aftermarket parts***
• Dimensions – Diameter 41.5mm (without crown) – Lugs tip to tip 49.5mm

What you get!

1. 1 x Case
2. 2 x 22mm Fat Spring Bars
3. 1 x Crystal Gasket – fitted
4. 1 x Case Back Gasket

• CASE BACKS IMPORTANT NOTE – CT231 or CT239B with built in spacer are for use with NH35/36 movements with thinner grey movement holder – no need to do anything the movement can drop straight in. If you are using a movement with the thicker black spacer you MUST use an oem case back or our CT200 or CT239A
• **Drilled Through Lugs for easy bracelet and strap changes reducing the risk of scratching/damaging your case
• *** We can pretty much guarantee 100% our CT manufactured parts and Seiko OEM SKX007 parts will fit. Most reputable aftermarket manufacturers parts will also be ok, but we cannot 100% guarantee this as in some instance’s tolerance build up/variation exists that can be problematic – bezels being a particular area that can be tricky. We now have many different SKX007 bezels in the hope that you may consider purchasing your bezel from us
• Finish – Hi Polish
• Water Resistance
• This case was tested to 300M during development and subsequent testing of actual production cases – no failures were recorded.
• Suitability
• A great basis for a custom build – a mass of SKX007 aftermarket mod parts are available for you to build your DREAM MOD
• Additional info – Ideal for building a complete custom 1 off unique dream mod – limitless possibilities with 1000s of SKX007 mod parts readily available worldwide.